Building a buggie or something wild? Post it here 38" plus tires. This area is for the elite offroader.
Sticky Threads
Thought I should share my new Bookmark This is the best link I have ever come across. It's more Toyota specific. But non the less has hours...
This section is for "hardcore" rig chat, all technical, no whoring and no BS. Rules are quite simple and rest assured they will be enforced. If...
Normal Threads
I have a set of 4 TSL Super Swampers 39.5x15x16.5. The 2 rears in decent condition hold air no prob, but the 2 fronts(worn down quite a bit more)...
I figured I'd share a couple of pics of my almost completed project cauz once it's done I ain't gonna have much time for the computer anymore......
I'm starting to plan my winter upgrades now and was hoping someone could school me on bent lower links, on purpose of course. Other then ground...
I started a custome buggy build about a year ago. It has been a slow process, as I am still in school. Here are some of the specs Engine: chevy...
well i have a lifted shortbox chevy, sbc350, sm465, 208 t-case, and it seems in 4th gear at 2500ish rpm it has this really weird knock right under...
Getting the rig ready to load on my trailer and never had a time where I put it in 2wd Hi before, so I thought I'd take it for a rip down the street....
so I'm in the preparation stage and I'm having extream difficulties with deciding on what to do with the fron axle. The D30 just won't like being...
Not necessarily Jeep related but I do consider it Hardcore Tech you'll see what I mean by the pics. Let the flaming begin Drivetrain SR20...
Well after a 3 year hiatus from Jeeps I have finally had my "man card" re-instated :lildevil:. I've snagged a 1980 J20. I'm not sure yet if I'll be...
Hey guys, I have been searching for some rear discs to put on my dana 70 that will work with a 94 caddy rear caliper. The rear calipers have a...
OK here I go to meet tech/safety... What I started with, my overbuilt trail toy. 91 stdekick tube buggy, dana 44's, dual tcase's 35" boggers....
Who has something built up that they wheel HARD and are still running leafs? Pros and cons? I have been bouncing around the idea of switching...
Found answer. A is black, b is white, and c is grey. Thanks for the help I have a 99 TJ and all the wiring diagrams. The PCM diagrams show...
HaHa
Folks, Does anyone have specific information on a BENDIX Part # 142158, i have searched on the 'net unsuccessfully, wondered if someone would...
Hey everyone, So I bought a WELL built dana 44 from a '78 f250 that measures 66" wms to wms and is 6 bolt(so wheel adapters will prob be needed). ...
I picked up my 8.8 today from a 99 Explorer.... It has a huge lip on it... anyone ever shave one? Please share pictures etc. PS... I dunno...
So I bit the bullet, and I finally picked up my new Bronco. :D Its an 86 "Eddie Bauer" edition. It has a 5.0L V8 (efi) from a 91 F-150, 6" BDS...
Just wondering if this is kosher, or should be running 10" wide? Am thinking 10" however was just wondering what the true downsides would be (If...
Hey Guys Need some help Im running dana 60s front and rear on my 05 unlimited I dont have good brakes they feel spongy ...... maby I...
I am seriously thinking of buying a set of 39's that i found online. I originally was looking at 37's, but i am having a hard time finding a set...
anyone ever run a v8 on toyota axles, with 35's or bigger? chromo shafts and birfs? i read somewhere if you truss the front and put chromos in it...
It's really looking like i'm going to need a heavily modded gas tank to clear all my mods. I would love to order this: ...
Ok, so lets start off the hardcore section with some rig specs from all those that think their vessels fit the profile for this forum. Pics would be...
ok im asking for some opinions and clarification here first suspension keep in mind this is for a multipurpose rig 4 link single triangulated or...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
Your cart is empty
