Results 1 to 3 of 3

Thread: tranny skid plate

  1. #1
    Join Date
    Oct 2009
    Location
    Aylmer
    Posts
    5
    Time Online: 17 Hrs 52 Mins 16 Secs
    Avg. Time Online: 3 Secs
    Rep Power
    8

    tranny skid plate

    so im doing a 77 cj 7 rebuild but i had to find a new frame and its a 78. but the tranny skid plate is from the 77 and when i put it on just 2 of the bolts on each side line up and not the middle ones. Are all 6 suppose too line up or just the 4?

  2. #2
    Join Date
    Jul 2008
    Posts
    5,031
    Time Online: N/A
    Avg. Time Online: N/A
    Rep Power
    0
    post up a add in the wanted section for a skid that fits your 78 and matches your drivetrain.

    it shouldnt be hard alot of us have major junk laying around im a yj junk guy myself

    if the one you have works well just drill 2 more holes and weld in threded bungs so you have all 6.

    too much is never enough

  3. #3
    Join Date
    Oct 2009
    Location
    Aylmer
    Posts
    5
    Time Online: 17 Hrs 52 Mins 16 Secs
    Avg. Time Online: 3 Secs
    Rep Power
    8
    all right good stuff! i was thinking of doing that and there is already a nut in the frame just no hole's in the right spot on the skid

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •