Results 1 to 1 of 1

Thread: EatingSpam's build (CT Motorsports)

  1. #1
    Join Date
    Feb 2007
    Location
    Mississauga
    Posts
    209
    Time Online: 1 Wk 2 Days 22 Hrs 23 Mins 39 Secs
    Avg. Time Online: 49 Secs
    Rep Power
    11

    EatingSpam's build (CT Motorsports)

    Colin has been asking me to post up a small thread on his build that we did before the season. As many build often go, we started with a game plan that wasn't supposed to be too involved so he decided to just go with Dana 44's instead of the usual D60 swaps. We went with Waggy D44s for the axles. Here's a list of some of the parts that we went with.

    Dana 44 Waggy axles
    PSC Hydro assist
    FOA coil over shocks (He wanted to go with 14" travel shocks but we had to limit the droop to 12")
    Poly Performance upper shock mounts front and rear
    We modified a Rock Krawler rear Truss
    The trailing arm mounts on the frame end were salvaged from his BDS kit
    The lower control arm axle mounts are Poly Performance and some that we fabbed up in the shop
    Gen Right fuel tank and skid (stretch)
    Dana 300.NP231 t case doubler
    Attached Thumbnails Attached Thumbnails Picture_112.jpg   Picture_116.jpg   Picture_108.jpg  
    CT MOTORSPORTS
    7050A Bramalea Rd. Unit 22 Mississauga, Ontario L5S 1T1 (905) 452-3236
    OF4WD Member #3140

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •