Results 1 to 3 of 3

Thread: Stalled not not starting

  1. #1
    Join Date
    Nov 2009
    Location
    Niagara
    Posts
    142
    Time Online: 2 Mths 1 Wk 5 Days 16 Hrs 55 Mins 34 Secs
    Avg. Time Online: 5 Mins 59 Secs
    Rep Power
    8

    Stalled not not starting

    I was driving my 95 2.5L yj just now and it stalled now will not start. It turns over and I have full power to everything. I am showing codes 41 I started checking things out. The spark is weak and I check the voltage at the white wire going to the coil and it has 8.5 volts the battery has 12 volts. I heard the white wire should have 12 volts. Could this mean its the ECU?

  2. #2
    Join Date
    Nov 2009
    Location
    Niagara
    Posts
    142
    Time Online: 2 Mths 1 Wk 5 Days 16 Hrs 55 Mins 34 Secs
    Avg. Time Online: 5 Mins 59 Secs
    Rep Power
    8
    I was just messing around with it. I have a spark coming from the coil but any of the 4 wires coming from the distributor have no spark. Would this be the cap or rotor?

  3. #3
    Join Date
    Jan 2007
    Location
    Sudbury Ontario
    Posts
    1,133
    Time Online: 6 Days 10 Hrs 20 Mins 29 Secs
    Avg. Time Online: 31 Secs
    Rep Power
    12
    Pull the cap and take a look ,also if it looks ok ,make sure the rotor is turning when you crank it .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •