Results 1 to 13 of 13

Thread: Clutch Alignment Tool

Hybrid View

  1. #1
    Join Date
    Sep 2009
    Location
    Hamilton
    Posts
    536
    Time Online: 2 Mths 3 Wks 1 Day 6 Hrs 9 Mins 6 Secs
    Avg. Time Online: 6 Mins 47 Secs
    Rep Power
    9

    Clutch Alignment Tool

    Well I was hoping to get my drive line installed into my YJ next week but to my surprise the Centreforce clutch kit I got doesn't come with one. . . Anybody in the Hamilton area have one I could borrow for an AX-15 mounting to a 4.0L? or know where I could get one? Theres beer in it for the kind donor. . .

  2. #2
    Join Date
    Mar 2009
    Posts
    4,500
    My Mood
    Aggressive
    Time Online: 11 Mths 3 Wks 21 Hrs 35 Mins 14 Secs
    Avg. Time Online: 29 Mins 1 Sec
    Rep Power
    13
    most clutches don't come with an alignment tool...find a socket that fits in there nicely, use duct tape to make it fit snug (if needed), then use an extension to make it long enough to do your setup...or PA likely sells them...
    His ---> 04 LJ - 4.0L, Auto ɹnoɟ pɐǝɹʇǝɹ
    Hers ---> 75 Renegade Project - 304 V8, T15 3 speed uoıʇɐıɔossɐ ʎq pɐǝɹʇǝɹ

  3. #3
    Join Date
    Jul 2008
    Location
    Whitby, Ont
    Posts
    10,216
    My Mood
    Yeehaw
    Time Online: 8 Mths 3 Days 22 Hrs 33 Mins 25 Secs
    Avg. Time Online: 20 Mins 7 Secs
    Rep Power
    20
    yup used that at Camp NL 2 years ago! believe it is a 5/16 half drive that works! Or I am heading to Oakville on Sat and could drop it off if you need it
    WARNING! I am about to do something really fawking STUPID!!!!!!
    ᄅ# pɐǝɹʇǝɹ
    93 YJ- RIP- parted out like I should be

  4. #4
    Join Date
    Dec 2004
    Location
    Nobleton
    Posts
    4,464
    Time Online: 9 Mths 5 Days 19 Hrs 49 Mins 12 Secs
    Avg. Time Online: 22 Mins 44 Secs
    Rep Power
    17
    The PA ones are kinda shyte because you still have to stick your beak up in there to make sure the tool is in the center while you line things up and tighten it down. The plastic spliner jobbies are nice cause they hold everything exactly where it should be. That being said i have both and have probably used the PA one more because i can never find the plastic guy when i need it. You're more then welcome to them but i'm a bit far away. Unless you know someone passing by Etobicoke. Cheers
    97 TJ - The Build
    77 J10 - Death Proof
    11 SRT Challenger with some stuff
    05 Duramax

  5. #5
    Join Date
    Sep 2009
    Location
    Hamilton
    Posts
    536
    Time Online: 2 Mths 3 Wks 1 Day 6 Hrs 9 Mins 6 Secs
    Avg. Time Online: 6 Mins 47 Secs
    Rep Power
    9
    Thanks for the tip about the socket I think I'll go with that, I was surprised it didn't have one because the NAPA kits do. The tub isn't on the frame at the moment so should make this easy.

  6. #6
    Join Date
    Oct 2004
    Location
    beamsville
    Posts
    1,326
    Time Online: 2 Mths 18 Hrs 57 Mins 48 Secs
    Avg. Time Online: 5 Mins
    Rep Power
    15
    in a pinch give her the old clutch alignment tool, broom handle

  7. #7
    Join Date
    Sep 2007
    Location
    Brantford
    Posts
    7,986
    Time Online: 4 Mths 2 Days 17 Hrs 46 Mins 57 Secs
    Avg. Time Online: 10 Mins 7 Secs
    Rep Power
    118
    ^ that's the ticket right there. It's the way I do it..
    My latest project... Collection of Parts

    Other stuff... Building a doubler, D300 Flip kit

    Quote Originally Posted by Deadman 94 xj View Post
    "Coil springs are for ballpoint pens and pogo sticks".
    ебут раком

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •