Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: Rig Part Out - Lots of Jeep Parts

Hybrid View

  1. #1
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9

    Rig Part Out - Lots of Jeep Parts

    Rig Part Out
    New plan, picked up a Tj to build onto a mild family wheeler. I am selling off my current axles, wheels, tires and stuff I don't need. I am going to start collecting parts to go bigger. That will be a long process but I will have the TJ to scratch the itch.

    4 – 35x14.5x15 Pitbull Rockers on DIY Beadlocks (5 on 5.5) – 1500

    F250 HP Dana 44 front converted to 5 lug. Cromo shafts, Spicer HD joints, Grizzly locker, 5.13 gears, highsteer Warren Premium Hubs. Still setup for leaf springs (will bolt into a YJ), spare stock shafts, steering included – Sold

    Ford 9” rear, 31 spline, brand new (2 runs) Yukon HD nodular 3rd member with 3.250 bearings. Daytona pinion support, mini spool, 5.13 gears. Disk brakes. Huge truss and setup for 4 link. Freshly rebuilt 2 runs ago. Spare shafts – Sold

    Grey bikini top for YJ (sport bar) – 80

    Complete OBA system including 5 gal tank, shutoff switch, gauge and lines – 200

    Winch plate – Bolts onto YJ and maybe TJ? – 40

    2 AW4 trans – 100 each

    2 - 4L stock with some accessory’s and sensors – 100 each

    3 - Jeep YJ Rads - 40 each

    1 - Jeep YJ Hood - 40

    1 - Jeep CJ Hood - 40

    1 - Jeep YJ Grille with lights - 40

    2 – steering boxes – 40 each

    1 – Durango steering box – 80

    YJ backseat in good condition – 60

    Waggy leaf springs – pretty flat but flex great (bolt in 2 inch stretch in a YJ) – 80

    CJ Scrambler half top - 300

    Nice YJ seats (little dirty, and one small tear in drivers) - 60

    Lots more parts, will ad as I find them
    Can post pictures of anything requested.

    All Located in Renfrew.
    Will Ship on Buyers dime
    Last edited by Baja17; 11-24-2014 at 10:27 PM.
    89 YJ - 4.0 HO, AW4, flipped dana300, Hp44 locked cromo'd and highsteer, 9inch spool and disc brakes, 5.13 gears, waggy front springs (2inch stretch), custom 4link rear, 102in wb, 36 sx's.

    Tow Rig - 2002 Chev 2500 4x4 6.6 Duramax Diesel

  2. #2
    Join Date
    Feb 2004
    Location
    Toronto
    Posts
    492
    My Mood
    Lurking
    Time Online: 3 Wks 5 Days 2 Hrs 47 Mins 8 Secs
    Avg. Time Online: 2 Mins 9 Secs
    Rep Power
    14
    so the OBA system is complete minus the compressor? Will it work with a TJ?
    I have Anal Glaucoma- I can't see my ass coming into work today.

  3. #3
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    Includes compressor. It is a converted AC compressor. Will bolt on to any 4L and possibly the 2.5 as well

    Sent from my GT-N7105 using Tapatalk

  4. #4
    Join Date
    Aug 2011
    Location
    Ontario
    Posts
    4
    Time Online: 1 Day 18 Hrs 39 Mins 28 Secs
    Avg. Time Online: 8 Secs
    Rep Power
    0
    what year are the steering boxes and what condition, and would it work and fit on an 2003 jeep tj?
    Last edited by Rogan; 08-12-2014 at 09:11 PM.

  5. #5
    Join Date
    Nov 2005
    Location
    Toronto
    Posts
    20
    Time Online: 2 Days 11 Hrs 28 Mins 32 Secs
    Avg. Time Online: 12 Secs
    Rep Power
    12
    Same question here, what years are the steering boxes?

  6. #6
    Join Date
    Feb 2004
    Location
    Toronto
    Posts
    492
    My Mood
    Lurking
    Time Online: 3 Wks 5 Days 2 Hrs 47 Mins 8 Secs
    Avg. Time Online: 2 Mins 9 Secs
    Rep Power
    14
    i will take it but no time to pick up before i leave for fishing on Sat. Can come by on the 31st if that's OK e-mail me @ royfleming@rogers.com

  7. #7
    Join Date
    Jul 2014
    Location
    Canada
    Posts
    2
    Time Online: 1 Day 12 Hrs 50 Mins 19 Secs
    Avg. Time Online: 7 Secs
    Rep Power
    0
    What Style of Corbeau 5 point harnesses- Lack & Link or Camlock?

  8. #8
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    This part out has been put on hold. May be going different route. Selling the wifes car and building a dd / mild wheeler for the family and keeping my dedicated rig for the fun stuff.

    Sent from my GT-N7105 using Tapatalk

  9. #9
    Join Date
    Feb 2004
    Location
    Toronto
    Posts
    492
    My Mood
    Lurking
    Time Online: 3 Wks 5 Days 2 Hrs 47 Mins 8 Secs
    Avg. Time Online: 2 Mins 9 Secs
    Rep Power
    14
    keep me in mind for the on board air setup. I will take it if you change your mind. e-mail me to arrange pickup

  10. #10
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    Bump. Read First Post for details

  11. #11
    Join Date
    Feb 2004
    Location
    Toronto
    Posts
    492
    My Mood
    Lurking
    Time Online: 3 Wks 5 Days 2 Hrs 47 Mins 8 Secs
    Avg. Time Online: 2 Mins 9 Secs
    Rep Power
    14
    i still want the OBA.

  12. #12
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    ITs yours. PM me when you want to pick it up. I will take it off and have it ready

  13. #13
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    Axles Sold

    Sent from my GT-N7105 using Tapatalk

  14. #14
    Join Date
    Aug 2008
    Location
    Brampton
    Posts
    144
    My Mood
    Twisted
    Time Online: 3 Wks 4 Days 11 Hrs 14 Mins 21 Secs
    Avg. Time Online: 2 Mins 6 Secs
    Rep Power
    10
    Do you still have the OBA ????
    BAJA VP 2011
    OF4WD # 5962

  15. #15
    Join Date
    Feb 2004
    Location
    Toronto
    Posts
    492
    My Mood
    Lurking
    Time Online: 3 Wks 5 Days 2 Hrs 47 Mins 8 Secs
    Avg. Time Online: 2 Mins 9 Secs
    Rep Power
    14
    I had dibs and was waiting on you to let me know when you came into town. I sent you a PM just before
    Christmas. You had been saying you would be coming into Bowmanville to visit family and we were going to work out a pick-up then. I have been wondering what happened.

  16. #16
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    Didn't end up going to b ville. Still have it. Beatsttc still has dibs unless someone comes and picks it up at my house before I make it down there

    Sent from my GT-N7105 using Tapatalk

  17. #17
    Join Date
    Apr 2006
    Location
    Smiths Falls
    Posts
    5
    Time Online: 3 Days 22 Hrs 38 Mins 10 Secs
    Avg. Time Online: 19 Secs
    Rep Power
    12
    interested in the cj8 hard top...do you still have it ?..what shape is it in, does it have the rear glass and by chance would you also heve the metal bulkhead??...thanks...Dan

  18. #18
    Join Date
    Feb 2009
    Location
    Renfrew
    Posts
    12
    Time Online: 11 Mths 1 Wk 2 Days 14 Hrs 43 Mins 25 Secs
    Avg. Time Online: 28 Mins
    Rep Power
    9
    It is in good physical shape but is a bit faded. Good glass but no bulkhead

    Sent from my GT-N7105 using Tapatalk

  19. #19
    Join Date
    Apr 2006
    Location
    Smiths Falls
    Posts
    5
    Time Online: 3 Days 22 Hrs 38 Mins 10 Secs
    Avg. Time Online: 19 Secs
    Rep Power
    12
    sent you a pm...thanks..Dan

  20. #20
    Join Date
    Apr 2006
    Location
    Smiths Falls
    Posts
    5
    Time Online: 3 Days 22 Hrs 38 Mins 10 Secs
    Avg. Time Online: 19 Secs
    Rep Power
    12
    I,ll take the hard top , is this weekend a good time to pick up, what works for you and what is your address...thanks...Dan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •