Results 1 to 1 of 1

Thread: Built TJ for sale

  1. #1
    Join Date
    Nov 2008
    Newmarket, ON
    Time Online: 1 Wk 4 Days 20 Hrs 13 Mins 48 Secs
    Avg. Time Online: 58 Secs
    Rep Power

    Built TJ for sale

    Hey everyone,
    Just can't find the time for this thing anymore with a new baby and travel with work. I hate to see it go but I know someone else will be able to enjoy it a lot more often than I can.

    Only ever seen 1 winter - 1st year I got it . No rust whatsoever. Very clean build by a perfectionist, you'll see when you take a look. No corners were cut hence why the build went from a winter project to 5 years haha. Engine runs mint, excellent mechanical condition.

    I have built this jeep mainly for rocks and dry terrain with the lowest COG and highest flex I could get. It's relitively easy to get into (considering it's on 39's) and will fit drivers up and over 6'2". I kept everything original in the 'cab' from the dash to the center colsole. I didn't want to loose the TJ feel of it! As it sits it will need removable mud flaps in the rear, rear body panels and 2 reverse lights to get back on the road. I've trailered it around since I built it.

    BUILD THREAD - Start to finish

    2002 Jeep TJ Sport
    4.0L w/ 117amp alternator
    AX-15 5-speed
    38.5x 14.5x16.5 Super Swamper SX with 80+%
    32-bolt beadlock rims
    Rebuilt Dana 300 twin sticked
    Rubicon Express rear 1350 drive shaft
    1978 Scout II Dana 44 front axle w/ 5.38 detroit locker, HD cover (fresh rebuild)
    1978 Scout II Dana 44 rear axle w/ 5.38 spool locker, HD cover
    14" Fox coilovers w/ remote reservoir
    Ebach springs dialed in to exact geometery and weight of components
    TMR 3-link in the front (2"x.25 DOM)
    TMR triangulated 4-link in the rear (2"x.25" DOM)
    1.25" Johnny Joints all around
    4 wheel disc brake; Cadillac Eldorado rear calipers
    1"MML, 1.25" BL
    Ram 2500 master cylinder
    Proportional brake valve
    PSC Steering Box w/ hyd. ports
    2" hydro-assist steering ram
    1-ton TMR high clearance steering links & panhard
    10000 lbs. winch
    TMR front bumper
    Metalcloak fenders w/ removable 6" flares (bomb!)
    Full roll cage with removable roof/a-pillar for work under dash (1.75x.125" cold rolled)
    "Boat-side" with bullet proof custom rocker guards.
    RCI 2161A aluminum fuel cell w/ TJ pump and braided stainless fuel line
    Bucket seats w/ 5 point harness'
    LED's all around w/ LED relay for proper blinking rhythm
    48" Highlift Xtreme Jack
    Onboard tool box
    Full size spare
    Misc. parts, plugs, belts, hoses, tools, electric fan etc.

    Click image for larger version. 

Name:	IMG_20141021_130656_EDIT.jpg 
Views:	59 
Size:	1.07 MB 
ID:	102372

    Click image for larger version. 

Name:	IMG_20141021_131847_EDIT.jpg 
Views:	60 
Size:	1.09 MB 
ID:	102373

    Click image for larger version. 

Name:	IMG_20141021_141558.jpg 
Views:	93 
Size:	968.7 KB 
ID:	102374

    Click image for larger version. 

Name:	20140530_065456.jpg 
Views:	57 
Size:	908.7 KB 
ID:	102375

    Click image for larger version. 

Name:	20140531_131312.jpg 
Views:	57 
Size:	943.9 KB 
ID:	102376

    I've spent much more than I expect to get back out of this thing but that's the name of the game.
    Looking to get $11000obo located in Newmarket. Feel free to text or call with any questions. I don't check my email very often to those are your best bet.

    I've also got a 97 Ford Dana 60 and 14 Bolt that would be a nice addition to this rig in the future. Depending on what I'm offered they will be a part of the deal otherwise I'll keep them for later.

    I'm also in the market for a 2011+ Ford F-250 Crew Diesel. Let me know what you have, I've got a 2013 F-150 55000km to trade.


    905-853-two zero two nine
    Last edited by siamesedog; 08-26-2015 at 03:13 PM. Reason: Add build thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts