My 35 has been suffering for a while now. the rear swaybar has snapped 2 bolts in the axle and now my bushings are all worn out. The seal is leaking and i need new brakes all around. i have searched for a replacement bolt-in 35 or 44 off and on for quite sometime but 3:73s are scarce. So at this point i am thinking of just picking up a set of 4:10 axles and refreshing them. My drivetrain is 4.0 with the dreaded 3 speed auto. Would the 4:10s affect my driveability much since i only put about 5K a year on the Heep? My commute is 10km each way on city streets daily with rare highway driving except to and from wheeling trips. what are your thoughts?