Page 6 of 6 FirstFirst 123456
Results 101 to 107 of 107

Thread: 44-9 Hybrid axle build

  1. #101
    Join Date
    Feb 2007
    Location
    Burlington
    Posts
    614
    Time Online: 6 Days 8 Hrs 35 Mins 17 Secs
    Avg. Time Online: 31 Secs
    Rep Power
    11
    Well, I found the weak point of my rear 9" on the weekend.

    The damn cross pin for the mini spool sheered in 3..

    Ended up workin with a few good freinds (THANX Meise, George, Curt) and had some parts brought to me so I could wheel the rest of the weekend..

    This mini spool will be comin out very soon...

    anyhow here is some carnage pics.











    But otherwise EVERYTHING works awsome!!!


    1986 2 door XJ, 2.5L 5 spd, 231/300 twin sticked,
    8" lift, 36" IROKs, 44-9 frt axle with 5.13's and a detriot, rear 9" with 5.13's and a spool, custom track bar, custom snorkel,
    9500lbs winch with custom front and rear bumpers, SBS, Staang's FAB front and rear longarms, crossover steering.
    http://www.youtube.com/staang
    Need any Mechanical or FAB work done PM me or visit my website

  2. #102
    Join Date
    Mar 2007
    Location
    Exeter, Ontario
    Posts
    2,937
    Time Online: 2 Mths 1 Wk 2 Days 14 Hrs 23 Mins 47 Secs
    Avg. Time Online: 5 Mins 44 Secs
    Rep Power
    13
    No gear damage? Lucky. When that happened in my old front carrier the broken chunk went into my pinion.

    Looks like everything works real well.
    90 YJ. 4link F/R, 16" SAW Airshocks, 32bolt Beadlocks, D60/14bolt, Full Hydro/Hydroboost L67 3.8SC 700r4 NP231/D300
    02 Yukon XL on 37's DD
    91 Cherokee Juggy scrapped for Greener Grass
    I prefer to build it and not buy it, you see it, I probably made it.

  3. #103
    Join Date
    Feb 2007
    Location
    Burlington
    Posts
    614
    Time Online: 6 Days 8 Hrs 35 Mins 17 Secs
    Avg. Time Online: 31 Secs
    Rep Power
    11
    The pinion bearings were trashed but otherwise no other damage.

  4. #104
    Join Date
    Dec 2004
    Location
    Milton
    Posts
    2,023
    Time Online: 6 Days 9 Hrs 2 Mins 19 Secs
    Avg. Time Online: 31 Secs
    Rep Power
    15
    Nice pic, but it looks like you lost your right arm! LOL

  5. #105
    Join Date
    Jul 2008
    Posts
    5,031
    Time Online: N/A
    Avg. Time Online: N/A
    Rep Power
    0
    how is the front axle holding up did you ever change to reverse rotation?

    i may go the same route as i found a pile of nines for cheep! and realy dont want to get into the cost of a high nine rr center

  6. #106
    Join Date
    Feb 2007
    Location
    Burlington
    Posts
    614
    Time Online: 6 Days 8 Hrs 35 Mins 17 Secs
    Avg. Time Online: 31 Secs
    Rep Power
    11
    I havn't had a chance to pick up a high pinion... But the axle is doin just fine. I busted an outer axle shaft but they were old and sloppy at the u joint. So it was a ticking time bomb.. Got some superior chromos now..

  7. #107
    Join Date
    Jul 2008
    Posts
    5,031
    Time Online: N/A
    Avg. Time Online: N/A
    Rep Power
    0
    right on pm me if you need spare for the rear i found a place that has been hanging on to nine for the 70s.

    there was more than a few hi pinion centers in the weeds

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •