Page 1 of 2 12 LastLast
Results 1 to 20 of 34

Thread: Another XJ gets New Floors!!!

  1. #1
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13

    Another XJ gets New Floors!!!

    I am in the process of putting in new floors in my 92 Cherokee. I bought the OEM floor pans from Jeepmans Offroad(thanks Alex). I will be doing the driver and passenger sides.
    Any suggestions/tips are greatly appreciated, as this is my first time doing this type of work!
    Here's what ive done so far...

    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    No fingers, no toes, she doesn't own elbows,
    No phalanges no knobby knees to knock.
    She don't need knuckles or hands to go see punk rock bands, She's always in the stands, she's nubs

  2. #2
    Join Date
    Jul 2008
    Posts
    5,031
    Time Online: N/A
    Avg. Time Online: N/A
    Rep Power
    0
    looks like your going about it the right way
    next step patch up the inner rockers if needed coat everthing with weld through primer and weld your brains out.
    make sure you weld in the frame section to the floor realy good

  3. #3
    Join Date
    Apr 2009
    Location
    Selkirk Ontario
    Posts
    5,191
    My Mood
    Confused
    Time Online: 2 Yrs 1 Mth 3 Wks 3 Days 21 Hrs 34 Mins 45 Secs
    Avg. Time Online: 1 Hr 4 Mins 32 Secs
    Rep Power
    14
    hell of a job..looking great , don't forget the bed liner too

  4. #4
    Join Date
    Jan 2006
    Location
    Brantford
    Posts
    545
    Time Online: 2 Wks 6 Days 23 Hrs 40 Mins 43 Secs
    Avg. Time Online: 1 Min 43 Secs
    Rep Power
    12
    let me know if ya need help big B, i have a welder and 3 types of blasters to clean er up

    W "GO PREPARED" W
    2014 Sahara Unlimited
    WARN winch equipped!

  5. #5
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    Thanks guys

    I am a little puzzled on how to go about the driver side where that shifter linkage is bolted too... any ideas?? The floor pan does not go up that high so i will need some extra sheet metal!

    Karl i may take you up on that, I dont have a welder right now but i might be boring the neighbors.

  6. #6
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    Quote Originally Posted by mud bros.1 View Post
    looks like your going about it the right way
    next step patch up the inner rockers if needed coat everthing with weld through primer and weld your brains out.
    make sure you weld in the frame section to the floor realy good
    the rockers are pretty solid, except for one spot on the driver side right at the front...ill snap a pic today.

  7. #7
    Join Date
    Oct 2006
    Location
    Guelph
    Posts
    1,052
    My Mood
    Bitchy
    Time Online: 3 Mths 2 Wks 1 Day 4 Hrs 13 Mins 21 Secs
    Avg. Time Online: 8 Mins 38 Secs
    Rep Power
    13
    brady maybe we can fred flintstone it when we go wheeling, screw floors
    Last edited by True; 06-14-2009 at 06:10 PM.

  8. #8
    Join Date
    Jan 2006
    Location
    Brantford
    Posts
    545
    Time Online: 2 Wks 6 Days 23 Hrs 40 Mins 43 Secs
    Avg. Time Online: 1 Min 43 Secs
    Rep Power
    12
    Bahahaha nice! when you getting a Jeep True?

  9. #9
    Join Date
    Oct 2006
    Location
    Guelph
    Posts
    1,052
    My Mood
    Bitchy
    Time Online: 3 Mths 2 Wks 1 Day 4 Hrs 13 Mins 21 Secs
    Avg. Time Online: 8 Mins 38 Secs
    Rep Power
    13
    sooner then later I hope. Depends on the $$$ situation, no job sucks.

  10. #10
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    Heres a pic of the d/s rocker and the d/s floor where the shifter linkage for the t-case bolts to;

    ps. corey stop whoring in my thread

    [IMG][/IMG]
    [IMG][/IMG]

  11. #11
    Join Date
    Jul 2008
    Posts
    5,031
    Time Online: N/A
    Avg. Time Online: N/A
    Rep Power
    0
    your going to have to hit up your local body shop supply store for some 20ga steel.
    unless your in hamilton then i will give you some

  12. #12
    Join Date
    Jan 2006
    Location
    Brantford
    Posts
    545
    Time Online: 2 Wks 6 Days 23 Hrs 40 Mins 43 Secs
    Avg. Time Online: 1 Min 43 Secs
    Rep Power
    12
    Ahh i can get ya a YJ for $200 you must have that??? lol
    Quote Originally Posted by True View Post
    sooner then later I hope. Depends on the $$$ situation, no job sucks.

  13. #13
    Join Date
    Oct 2006
    Location
    Guelph
    Posts
    1,052
    My Mood
    Bitchy
    Time Online: 3 Mths 2 Wks 1 Day 4 Hrs 13 Mins 21 Secs
    Avg. Time Online: 8 Mins 38 Secs
    Rep Power
    13
    Quote Originally Posted by wantmyroverback View Post
    Ahh i can get ya a YJ for $200 you must have that??? lol
    That I do!

  14. #14
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    Quote Originally Posted by mud bros.1 View Post
    your going to have to hit up your local body shop supply store for some 20ga steel.
    unless your in hamilton then i will give you some
    im always up for a hop, skip and a jump to hamilton!!!

  15. #15
    Join Date
    Jul 2008
    Posts
    5,031
    Time Online: N/A
    Avg. Time Online: N/A
    Rep Power
    0
    well i got some steel for you just lay it in weld the crap out of it and you will not only enjoy the results you will learn a few things about floors in the prossess

  16. #16
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    heres an update of the floors, the welder worked alright but i think were just going to rent one for the day...
    (the battery died in the camera so i only got a few pics)

    [IMG][/IMG]
    [/IMG]

  17. #17
    Join Date
    Apr 2007
    Location
    Near London
    Posts
    624
    My Mood
    Cynical
    Time Online: 1 Day 7 Hrs 50 Mins 4 Secs
    Avg. Time Online: 6 Secs
    Rep Power
    11
    Nice, seems familiar.
    Bring back the Cherokee http://www.petitiononline.com/Cherokee/petition.html

    say what you want about my wife, leave my jeeps out of it.
    93 HO, 4.5" skyjacker lift, taurus fan, H4 lights, champion 8000lbs winch, custom home made front bumper, rear hitch, 136 amp alternator, 5-90's full mains set replacement with main fuse. High idle on switch, rear cargo area full extension drawer cabinet. Dual Batteries, Sanden oba and removable doors.V8 ZJ tie rod replacement with OTK insert.

  18. #18
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    im going to finish up sealing and painting the floors today..will get pics..

    but i was wondering about that liner they spray in from the factory???
    will paint/rocker guard stick to that stuff???? or do i have to peel it off??

    thanks

  19. #19
    Join Date
    Oct 2006
    Location
    Brantford
    Posts
    1,681
    Time Online: 2 Wks 3 Days 5 Hrs 11 Mins 1 Sec
    Avg. Time Online: 1 Min 24 Secs
    Rep Power
    13
    i honestly poop the bed with taken pics
    right now its all painted with that rubberized rocker gaurd...pics are coming
    also, i used Sure Seal from Part Source, worked very well I sealed the top and bottom!!!!
    [IMG][/IMG]

  20. #20
    Join Date
    Nov 2006
    Location
    Courtice, ON
    Posts
    1,252
    Time Online: 2 Wks 6 Days 11 Hrs 3 Mins 10 Secs
    Avg. Time Online: 1 Min 40 Secs
    Rep Power
    13
    cool twin stick mod on the t-case...

    I will have to do something like this to mine in the future, glad to see it comes out lookin ok.
    insert something witty here

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •