Results 1 to 3 of 3

Thread: 350 swap

  1. #1
    Join Date
    Jun 2003
    Location
    SIMCOE ONT.
    Posts
    56
    My Mood
    Amused
    Time Online: 1 Wk 2 Days 11 Hrs 13 Secs
    Avg. Time Online: 46 Secs
    Rep Power
    15

    350 swap

    Looking at swaping a 1988 chev 350 4x4 into my C/J
    Will it work on the C/J rear ends using motor, trannie and transfer case
    will i have a problem with rear ends not accepting chev power train
    and is there any other problems I might encounter
    Thanks
    Oyte

  2. #2
    Join Date
    May 2007
    Location
    windsor, on.
    Posts
    221
    Time Online: 1 Wk 5 Days 13 Hrs 56 Mins 58 Secs
    Avg. Time Online: 1 Min 2 Secs
    Rep Power
    11
    Different size U-joints, weak rear end...wrong length of driveshaft just to name a couple of issues... BUT you can get a combination U-joint to take care of the differences between d-shaft and yoke of your rear diff....and cooling issues, your rad is backwards compard to the chevy unless you make the chev one work (mine fit in my YJ but had to fab it in), exhaust- the chevy stock exhaust manifold won't fit between your frame rails so you'll need some "hugger" headers or something (it fits fine between the YJ frame rails)... All kinds of other lil shit that you'll have to work around but really nothing to crazy if you can weld!!

  3. #3
    Join Date
    Jan 2003
    Location
    Paris
    Posts
    525
    Time Online: 1 Wk 3 Days 44 Mins 18 Secs
    Avg. Time Online: 49 Secs
    Rep Power
    15
    pm-ed you

    MegaTherion
    '87 YJ - Chev 355, 700-r4, Dana 300, Dana 44s, 4:10s, 4" Super Lift, 35s.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •